CN|EN

News

News

Pixel Pitch, Viewing Distance and Budget: How to Size an LED Wall Before You Order

Author:BelightRelease Date:2026-11-16Number of visitors:5

Belight Volt Series outdoor fixed LED cabinet
Belight Volt Series cabinet: 1000 × 1000 × 75 mm, 25 kg, IP65 front and rear, ≥3840 Hz

Three numbers decide the price, and buyers usually supply none of them

“What does a 5 by 3 metre screen cost?” is not a question anyone can answer, because an LED wall is priced by pitch, brightness and cabinet type — and those follow from three inputs the buyer already owns: the real viewing distance, the content type, and the wall's location (indoor or outdoor). This sheet walks through the arithmetic we use in quotation, with worked examples based on Belight's published panel and cabinet dimensions, so you can size a project before asking for a price.

1. Start with distance, not with pitch

The working rule in the industry is about 1 mm of pixel pitch per 1 m of viewing distance for comfortable viewing of mixed content. Halve the distance for content people must read closely — price lists, menus, product specifications — and you effectively halve the pitch. These are rules of thumb, not standards: confirm with a physical sample at the client's actual distance.

Viewing distanceMixed contentText-critical
1.5 mP1.5 – P1.56P0.93 or finer
3 mP2.5 – P3P1.25 – P1.56
5 mP3.9 – P5P2.6
10 m and beyondP6.67 – P10P3.91

2. Worked example: a 4.8 × 2.7 m retail wall, viewed at 3 m

Take Belight's C Series indoor COB panel, which comes in 600 × 675 mm and 600 × 337.5 mm sizes. A 4.8 m wide wall is exactly 8 panels of 600 mm; 2.7 m high is exactly 4 panels of 675 mm. That is 32 panels, no cutting, no custom fill — the first thing to check on any project.

Now the resolution at each pitch: at 1.56 mm the wall is about 3077 × 1731 pixels; at 1.25 mm it is 3840 × 2160 — exactly UHD; at 0.93 mm it reaches roughly 5161 × 2903. At a 3 m viewing distance with price and product text, 1.25 mm is the sensible floor and 0.93 mm is the upsell. At 1.56 mm, you are selling a good image wall, not a readable spec sheet.

Power check: the C Series datasheet quotes 150 W per 600 × 675 panel at 600 nit white balance. 32 panels is 4.8 kW, or about 370 W/m² for a 12.96 m² wall. Feed that into the electrical plan with headroom rather than using the peak figure on the nameplate.

3. Outdoor changes the answer completely

A façade or roadside wall needs brightness and sealing before it needs fine pitch. Belight's Volt Series outdoor cabinet is 1000 × 1000 × 75 mm, 25 kg, IP65 front and rear, ≥3840 Hz and 14-bit grey scale, with 500 × 250 mm modules and front or rear maintenance. At 10–30 m viewing distance, pitch is a secondary decision: a 1000 mm cabinet module means the wall dimensions move in 1 m steps, so measure the façade first and fix the pitch afterwards.

4. The four levers that move the budget

Pitch. The single biggest lever. Halving pitch roughly quadruples the number of LEDs per square metre — good for sharpness, hard on cost and on the driving electronics.

Brightness. Indoor walls at 600 nits and outdoor walls at 800 cd/m² are different products, not options on one product.

Cabinet type. Fixed panels (39.5 mm) suit built-in walls; rental cabinets (80 mm) buy you speed of assembly and mechanical robustness you may not need.

Spares and service. Front-service designs avoid dismantling a wall to replace a module. Budget 2–5% spare modules and a control-system spare; it is cheaper than an air-freight emergency later.

5. Specification checklist before you send an RFQ

□ Wall width and height measured on site, in millimetres

□ Nearest and furthest viewer distance confirmed

□ Content type listed (video, text, live data)

□ Indoor or outdoor, with ambient light level noted

□ Panel or cabinet size accepted by the client (module count and joints)

□ Power supply capacity and cable route checked

□ Service access method agreed (front service or rear access)

□ Spare modules and control spare quoted in the same document

FAQ

Is a finer pitch always better?
No. Below the distance where the eye can resolve individual pixels, extra resolution is invisible and you are paying for LEDs the viewer never sees.

Can I mix pitches in one wall?
Not recommended for a single continuous surface. Different pitches mean different module resolutions and different drivers, and the seam becomes visible.

What if my wall does not divide evenly by the panel size?
Options are a custom panel size, a filler frame, or adjusting the wall to the nearest module multiple. Decide before quoting, not after.

Shenzhen Belight Technology Co., Ltd. — indoor, outdoor, rental, transparent, floor and creative LED displays

Tel: +86 0755 23081583 Email: info@belightled.com WhatsApp: +86 18038089950

Shiyan, Baoan, Shenzhen, China Web: www.belightled.com

Previous:Indoor Fixed vs Rental LED Cabinets: Which Wall Fits a Permanent Retail Install

Next:no more

Contact Us

  • +86 0755 23081583
  • info@belightled.com

  • Shiyan, Baoan, Shenzhen, China

Send us a message

Copyright © 2023Shenzhen Belight Technology Co., Ltd.
Belight Whatsapp
Belight Email